Facile synthesis of carbon self-doped g-C3N4 for enhanced photocatalytic hydrogen evolution

Graphite carbon nitride (g-C₃N₄) is an appealing metal-free photocatalyst for hydrogen evolution, but the potential has been limited by its poor visible-light absorption and unsatisfactory separation of photo-induced carriers. Herein, a facile one-pot strategy to fabricate carbon self-doped g-C₃N₄ composite through the calcination of dicyanamide and trace amounts of dimethylformamide is presented. The as-obtained carbon self-doped catalyst is investigated by X-ray photoelectron spectroscopy (XPS), confirming the substitution of carbon atoms in original sites of bridging nitrogen. We demonstrate that the as-prepared materials display remarkably improved visible-light absorption and optimized electronic structure under the premise of principally maintaining the tri-s-triazine based crystal framework and surface properties. Furthermore, the carbon doped g-C₃N₄ composite simultaneously weakens the transportation barrier of charge carriers, suppresses charge recombination and raises the separated efficiency of photoinduced holes and electrons on account of the extension of pi conjugated system. As a result, carbon self-doped g-C₃N₄ exhibits 4.3 times greater photocurrent density and 5.2 times higher hydrogen evolution rate compared with its bulk counterpart under visible light irradiation.     

Lime mud CaCO3 for use as a filler material in papermaking: Impact of its preflocculation with cationic polyacrylamide

Cationic polyacrylamide with different molecular weights were used to preflocculate the lime mud (LM) before it was added to the paper stock for handsheet preparation. The particle sizes, ζ potential, and morphology of the unpreflocculated and resulting preflocculated LM were studied. We found that high‐molecular‐weight cationic polyacrylamide (H‐CPAM) led to larger LM flocs with a more positive ζ potential. The scanning electron microscopy images indicated that the morphological structure of the filler hardly changed during the preflocculation process. The effects of the preflocculation on the filler retention and paper properties were also investigated. The results show that the handsheets filled with preflocculated LM had better hydrophobicity and strength properties compared to handsheets filled with unpreflocculated LM, especially for H‐CPAM‐preflocculated LM. The paper formation was also improved, and the optical properties nearly remained the same. In addition, the LM preflocculated with H‐CPAM had the highest filler retention. At a filler loading of 30%, the filler retention of the H‐CPAM‐preflocculated LM was higher than 86; it was less than 82.5% in other cases. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41640.     

A simple physical mixing method for MnO2/MnO nanocomposites with superior Zn2+ storage performance

MnO₂/MnO cathode material with superior Zn²⁺ storage performance is prepared through a simple physical mixing method. The MnO₂/MnO nanocomposite with a mixed mass ratio of 12:1 exhibits the highest specific capacity (364.2 mA·h/g at 0.2C), good cycle performance (170.4 mA·h/g after 100 cycles) and excellent rate performance (205.7 mA·h/g at 2C). Analysis of cyclic voltammetry (CV) data at various scan rates shows that both diffusion- controlled insertion behavior and surface capacitive behavior contribute to the Zn²⁺ storage performance of MnO₂/MnO cathodes. And the capacitive behavior contributes more at high discharge rates, due to the short paths of ion diffusion and the rapid transfer of electrons.     

Characteristics and Rheological Properties of Polysaccharide Nanoparticles from Edible Mushrooms (Flammulina velutipes)

Nanotechnology has become relevant in the food‐related industries, and edible mushrooms can be a potential raw material for providing satisfied edible nanomaterial. In this study, by following 3 different pretreatments (hot water or cold alkali or hot alkali) insoluble polysaccharide nanoparticles were prepared from Flammulina velutipes by wet milling and high pressure homogenization and their properties were investigated. The resultant nanoparticles were characterized by SEM, GC‐MS (for its main compositions), FTIR, XRD, and TG. The 1 wt% nanoparticle dispersions presented non‐Newtonian, shear‐thinning fluids with the viscosity in an increasing order for the hot water < cold alkali < hot alkali. Moreover, the dynamical rheological results showed differences of storage (G′) and loss (G″) moduli of these particle dispersions. It was concluded that the Flammulina velutipes‐derived polysaccharides nanoparticles have great potential applications in the food industry, for example, as emulsifiers, reinforcement agents, and bioactive carriers.     

纤维孔隙率的测量及密度法测量的纤维素含量

利用纤维体积密度和氦比重方法测量纤维素密度、绝对密度、体积密度和孔隙率，进而准确地计算出纤维素的含量。     

Comparison of Dye Behavior from Aspen HYP: Dyes Added in the HYP Manufacturing Process Versus Dyes Added at the Papermaking Wet End

Abstract

The yellowish color of High Yield Pulp (HYP) gives some psychological obstacles and limits its application in some paper grades. Dyes are widely used in the papermaking process to shade the yellowish color of the paper products. We proposed to add dyes into the HYP manufacturing process to minimize the yellowish hue. In this work, we substituted the dye-added HYP (dyes added in the HYP manufacturing process) for hardwood kraft pulp in the production of fine paper grades, and compared the results from those by adding dyes into the papermaking wet end. A higher dye effectiveness was obtained when we used the dye-added HYP. Also, the dye-added HYP gave more effective performance of Precipitated Calcium Carbonate (PCC) fillers and Optical Brightening Agents (OBA) in terms of CIE whiteness and b*. In addition, the dye-added HYP showed less negative effect on brightness and better compatibility with other dyes. The underlying mechanism for the above experimental observation was proposed.     

黏合剂对汽车尾气净化器衬垫性能的影响

结合原料纤维的特点,时制作汽车尾气净化器衬垫所使用的黏合剂种类和用量进行了研无实验结果表明：成膜强度高、柔韧性好的黏合剂可以为衬垫提供良好的强度、柔韧性和耐折性能．B-3丙烯酸类黏合剂可以赋予衬垫较好的强度性能;且B-3丙烯酸类黏合剂在海泡石／玻璃纤维与海泡石／陶瓷纤维体系中的用量分别以6％、8％为最佳